Analytical Sciences


Abstract − Analytical Sciences, 29(5), 571 (2013).

Determination of Lead by Square Wave Anodic Stripping Voltammetry Using an Electrochemical Sensor
Fuqiang FAN, Junfeng DOU, Aizhong DING, Kedong ZHANG, and Yingying WANG
College of Water Sciences, Beijing Normal University, Beijing, Street Xinjiekouwai No. 19, 100875, P. R. China
A novel electrochemical assay for lead (Pb2+) detection was developed in this study, involving the use of screen-printed electrodes (SPEs). The sensor was used with selected supporting electrolytes in conjunction with square wave anodic stripping voltammetry (ASV) to study the redox characteristics of lead. Good response currents were obtained using a supporting electrolyte comprising acetate buffer pH 5.0 with 0.5 mol L−1 NH4Cl. Without a deposition process, the anodic peaks for higher lead concentrations (ranging from 0.7 to 10 mg L−1) were sharp and symmetrical on the bare electrode surface. Optimal ASV conditions were obtained with a well-defined stripping peak for 200 μL deposition solution volumes, a deposition potential of –1.2 V for Ag/AgCl, and a deposition time of either 300 or 400 s. Under optimal conditions, a calibration curve ranging from 6.25 to 500 μg L−1 was obtained for lead determination. Furthermore, the performance of a Hg-free sensor for Pb2+ determination was compared with that of a Hg-coated electrode, and the detection limits were approximately 0.9 – 1.5 μg L−1.