Analytical Sciences


Abstract − Analytical Sciences, 32(10), 1053 (2016).

Electrochemical Detection of As(III) by a rGO/Fe3O4-modified Screen-Printed Carbon Electrode
Zhiyong XIE,* Juncui XU,** Fazhi XIE,* and Shiquan XIONG***
*School of Materials Science and Chemical Engineering, Anhui Jianzhu University, Hefei 230022, People’s Republic of China
**Department of Chemical and Chemical Engineering, Hefei Normal University, Hefei, Anhui 230601, People’s Republic of China
***Key Laboratory of Ion Beam Bioengineering, and Key Laboratory of Environmental Toxicology and Pollution Control Technology of Anhui Province, Hefei Institutes of Physical Science, Chinese Academy of Sciences and Anhui Province, Hefei, Anhui 230031, People’s Republic of China
A reduced graphene oxide (rGO)/Fe3O4 composites modified screen-printed carbon electrode (SPCE) was used to determinate As(III) in a HAc–NaAc buffer solution. The rGO/Fe3O4 composites were prepared by a simple and one-pot synthesis method, and characterized by X-ray diffraction (XRD), field emission scanning electron microscopy (SEM), FT-IR and Raman spectra. The electrochemical behaviors of the composite electrode were characterized by cycle voltammetry and electrochemical impedance spectroscopy. The experimental parameters, such as supporting electrolyte, solution pH, deposition potential, deposition time were optimized, respectively. The calibration curve for the detection of As(III) in the range of 2 to 20 ppb was I = –4.495 + 1.922C, with a coefficient of 0.994. The sensitivity was 1.922 μA/ppb, and with about twice Fe3O4 modified SPCE, a detection limit as low as 0.3 ppb was achieved. The proposed electrode was validated by analyzing the As(III) content in real water samples.